plastic welding
4 posters
Page 1 of 1
Re: plastic welding
Thanks Sean
will do so
cheers
will do so
cheers
CLEMENS tupperware- Posts : 5
Manna : 0
Join date : 2010-09-16
Age : 48
Location : GORDON'S BAY
Re: plastic welding
No problem Clement, just post when you are going out on the Work Week ahead or Weekend Ahead sections and hopefully one of us is available too!
Re: plastic welding
Thanks a mil guys - will give them a ring
I will be fishing in the Poort area often if not launching the boat and would like to know if anybody
would like to join me, and probably teach me a couple of tricks - am very keen and easy
not sure if i'm allowed to but here is my e-mail clemens@mweb.co.za
cheers
I will be fishing in the Poort area often if not launching the boat and would like to know if anybody
would like to join me, and probably teach me a couple of tricks - am very keen and easy
not sure if i'm allowed to but here is my e-mail clemens@mweb.co.za
cheers
CLEMENS tupperware- Posts : 5
Manna : 0
Join date : 2010-09-16
Age : 48
Location : GORDON'S BAY
Re: plastic welding
Go to a panel beater and asked them where do they have the plastic bumpers being repaired or there is a copany in CT called Gundle plastic or PLastic,rubber and mouldings that would be able to help you or put you on some one who does this type of repair work. Regards.
Cracker man- Posts : 12
Manna : 7
Join date : 2010-02-02
Location : Strand
Re: plastic welding
Good luck Clemens, sorry i cant help you either.
BTW - LMAO when saw the avatar photo classic!
BTW - LMAO when saw the avatar photo classic!
Re: plastic welding
ya also thought so - liked the hunter ski because its not so heavy - Thanks - spoke to Brian - he wants me to take it to him in Joburg - bit of a pain
will do some more searching
will do some more searching
CLEMENS tupperware- Posts : 5
Manna : 0
Join date : 2010-09-16
Age : 48
Location : GORDON'S BAY
Re: plastic welding
Contact brian from hunterski. He may be able to help you / replace it.
I thought tupperware kayaks were meant to be strong.
I thought tupperware kayaks were meant to be strong.
The Fishin' Magician- Posts : 103
Manna : 9
Join date : 2009-11-26
Location : Somerset West
plastic welding
Hi guys
my son jumped on my Hunter ski (plastic kayak) and now has a hole in it - I would like it to be fixed properly
do you know of anybody that can do this or is there any other way of fixing the hole
about the size of a R1 coin
thanks
C L E M E N S
my son jumped on my Hunter ski (plastic kayak) and now has a hole in it - I would like it to be fixed properly
do you know of anybody that can do this or is there any other way of fixing the hole
about the size of a R1 coin
thanks
C L E M E N S
CLEMENS tupperware- Posts : 5
Manna : 0
Join date : 2010-09-16
Age : 48
Location : GORDON'S BAY
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
|
|